one page back
 
Standard MAINSAIL AND MIZZEN MEASUREMENT SHEET

 
 Yellow Boxes
Information SHOULD be given 
 

 
 Blue Boxes 
 Information optional 
 

Rig dimensions in metres:
Main: P m E m
Mizzen: Py m Ey m
Backstay adjustable Mast
Max. Curvature cm Position Half Height P?
Notes:

Dimension of Main and Mizzen in metres
(P Luff measured from top of boom to top of head Fig 1 and Fig 4) (E Foot measured from back of mast to centre bolt Fig 1 and Fig 5)
Mainsail:  P Luff E Foot   Weight gr   Area
Mizzen: Py Luff Ey Foot   Weight gr   Area
Sailcloth: Standard is Dacron
Cut: Standard is Crosscut
Notes

Reefing hook:
Outhaul Car
A: Back of mast to centre bolt mm
E: Top of boom to centre bolt mm
C: Top of boom to sail insertion mm
D: End of boom to centre bolt mm
B: Top of boom to centre bolt 
     of oulhaur car
mm
F: Width of outhaul pulley / shackle mm
G: Width of tack eye mm
H: Back of mast to reefing hook mm
I: Top of boom to reefing hook mm

Standard: we deliver the sail with tack / clew rings see sail specification
Optional: tack / clew with pressed eyes
Sail Number: No. Flo Stripe:  Colour
Luff: battenslide car system
If yes, give details on next page see Fig 10. For other luff systems see - Fig. 3
LUFF attached to mast with: in Fig. 3
A= mm B= mm C= mm D= mm
Slide model No.: Length mm
FOOT attached to boom with :Free-flying foot:
or in Fig. 3
A= mm B= mm C= mm D= mm
Slide model No.: Length mm
Mast (make):
Boom angle standard 88 or or straightline dist. from
head (mast) to clew (boom)
m

Remarks: If you have reefing hooks on your gooseneck 
fitting as shown in Fig. 4 and 7 we fit standard reefing 
rings on the sail - see Fig. 13
 

If you have no reefing hooks on your gooseneck fitting 
we can fit a pressed eye with webbing band and two 
st. st. rings - see Fig 14.
 
Type of fitting: A B (no extra change)       
We can design standard reefing positions, or you can specify by giving us the following information - see Fig. 1
No. of reefs Side for reefing ring : 1st 2nd 3rd

Horizontal priority (when reefing points on boom are fixed):  

(Back of mast to centre reefing eye leech)

R1h m  R2h m  R3h m

Vertical priority (when reefing points on boom are variable):  

(specify height of centre reefing eye luff above boom)

R1v m  R2v m  R3v m
Battens: Standard - we deliver the sail with battens
Notes:

 
 
 
 
N: (Fig 10) Back of mast to luff = mm
O: (Fig 10) Centre axle slide to luff = mm
P: (Fig 10) Back of mast to centre hole of headboard = mm
R: (Fig 11) Available width for webbing = mm
S: (Fig 11) Available width for fitting = mm
 
 
 
               
 Batten slidecar system Make:
Model No.
 
 

ORDER DATE
Boat name
Boat Type and Make
Length Weight
Owner
Tel e-mail
Fax
Address for Order
Confirmation and
Invoice
Address for sail delivery
Date for sail delivery
Other comments
We will send you the ORDER CONFIRMATION / INVOICE and our bank details within a few days.